Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
57 Provision protection scheme parameters
57.1 Purpose
This chapter provides procedures to provision Protection Schemes for the 9500
MPR.
Note: If an RF loopback is in place with MPT-HLC, you need to remove it before configuring
protection.
57.2 Procedures
This section provides the following procedures:
To view protection schemes
1. Select Protection Schemes Tab.
2. Expand Protection Schemes in the resource tree area.
•
To view protection schemes
•
To provision the Equipment Protection Schemes parameter
•
To provision the Hot StandBy Protection Schemes parameter
•
To provision Rx Radio Protection Schemes parameters
The Protection Schemes tab opens. See
All the protection schemes provisioned for the 9500 MPR radio are displayed in
the main window pane.
Provision protection scheme parameters
Figure
576.
763
Advertisement
Table of Contents
