Nokia 9500 MPR User Manual page 366

Release 7.0.0 3DB 19286 ACAA Issue 01
Provision cross connections
5. On the PDH-ETH pop-up, click OK.
6. On the Cross Connection screen, click Apply.
7. From the Connections tab, verify the PDH-ETH cross-connection was entered
To provision an SDH to Radio Cross connection
1. Verify port segregation provisioning. Port segregation should be provisioned
2. Select SDH port and drag to draw line to RADIO port.
366
correctly.
Caution: When parallel radio paths exist between two MSS shelves, port
segregation should be provisioned between the parallel radio paths at both ends
to prevent a loss of traffic.
between parallel radio paths at both ends when they exist on the NE. Also port
segregation should be provisioned between the radio port and other Ethernet
and/or radio ports where connectivity is not desirable. See
segregation/connectivity
SDH-RADIO pop-up displays. See
for detailed steps to view/provision port segregation.
Figure 201.
WebEML User Manual
Provision port