Table of Contents
Advertisement
Installation
Installing the Nokia D211 software
© Nokia Corporation 2004. All rights reserved.
There are some slight differences in the installation process between the different
Windows operating systems. If the installation differs from the steps described
below, follow the instructions on the screen.
The Nokia D211 software requires 20 MB of free disk space.
Note: Do not insert the radio card into your computer until the installation
program instructs you to do so.
1 Exit all Windows programs. Insert the CD-ROM into the CD-ROM drive of
your computer.
If the CD-ROM is not launched automatically, go to your CD-ROM drive (e.g.
drive D) and double-click on Start.exe.
2 Select the language for the CD-ROM and installation program and read
through and accept the Nokia license agreement. If you do not accept the
license agreement, you cannot use the CD-ROM.
3 The main screen of the CD-ROM opens. Click Install to start the installation.
4 The Welcome page of the installation wizard opens. Click Next to continue.
5 Read through and accept the Nokia license agreement. If you do not accept the
license agreement, you cannot use the software and the installation procedure
stops. Click I Accept to accept the license agreement.
6 Select the destination folder for the software. The default folder is C:\Program
Files\Nokia\Nokia D211. If you want to install the software in another drive or
folder, click Browse. When you have selected the correct destination folder,
click Next.
Note: You cannot install the Nokia D211 software on a network drive.
7 Select the type of installation you want. The Administrator option is for system
administrators only. Custom allows you to choose the individual software
components to be installed, and is recommended for advanced users. Typical
installs the most common software components. This option is recommended
for most users. When you have selected the desired type of installation,
click Next.
8 Check the installation settings. To accept them, click Next. To change the
settings, click Back, make the changes, and then click Next. The installation
program starts copying the files.
9 When the installation program prompts you to insert the radio card, insert it
into the PC card slot of your computer as shown in Figure 4. Note that the radio
15
Installation
Advertisement
Table of Contents
