Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Configure radio parameters
Figure 601
MPT-HL settings with ATPC
21. Provision the MPT-HL radio channel ATPC:
22. Select an action.
23. Provision the spare MPT-HL ATPC
798
i. Select ATPC Enabled check box.
ii. Enter the Min-Max transmit power value range (dBm).
iii. Enter the Remote ATPC Rx Threshold (-min / -max dBm).
iv. Click Apply.
a. To
Provision the spare MPT-HL
b. To
Provision the MPT-HL radio protection
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see
parameters.
RTPC, go to step 18.
scheme, go to step 25.
Figure 601
for an example of the ATPC
WebEML User Manual
Advertisement
Table of Contents
