Nokia 9500 MPR User Manual page 300

Release 7.0.0 3DB 19286 ACAA Issue 01
Administer Ethernet Ring Protection (ERP)
2. Modify or Delete Ethernet Flow from VLAN Configuration. For detailed steps to
3. Delete VLAN IDs from Ethernet Ring cross-connections. For detailed steps to
4. From the ERP Instance area, select ERP instance to delete. See
5. Click Delete.
6. Click Yes.
To delete a Ring topology
Note: Ring topology can be deleted only when the following conditions exist:
If no cross-connections are configured on either ERP Instance associated with the Ring
Topology
No ERP Instances are associated with the ERP Topology.
1. From the Ring Topology area, select Ring Topology to delete. See
2. Click Delete.
3. Click Yes.
To add PDH, Radio, ETH, OR Pass-Through VLAN IDs to an ERP Instance
1. Add PDH, Radio, Eth, and Pass-Through VLAN IDs to ERP Instance using the
300
modify or delete VLAN Ethernet Flow, see
delete PDH, Radio, Eth, and Pass-Through to Ring cross-connections, see
Deprovision cross connections.
Confirm Operation window opens.
Confirm Operation window opens.
following procedure:
See Figure 164 for the following steps:
a. Select ERP instance to add VLAN IDs.
b. Enter VLAN IDs in Add VLANS text field.
c. Click >>.
d. VLAN IDs are added to the VLAN ID table.
WebEML User Manual
Administer VLAN configuration.
Figure 161.
Figure 161.