Release 7.0.0 3DB 19286 ACAA Issue 01
Provision Ethernet ports
To provision synchronous Ethernet operation mode parameters
1. Provision Ethernet port Synchronous Ethernet Operation Mode parameters
Note: Synchronous Ethernet Operation Mode is supported by Ethernet ports configured on
the Core-E card, CorEvo card, EASv2 card, or MSS-O.
Figure 241
Provision Core/EAS/MSS-O synchronous Ethernet operation mode
a
b
c
416
using the following procedure. See
a. Select Ethernet Port#n to provision (Ethernet Port #1/#6).
b. Select Settings tab.
c. Configure a user port label if needed.
d. Provision Synchronous Ethernet Operation Mode: select Synchronous or
Not-Synchronous.
e. Synchronous Ethernet Operation Mode selected?
a. If Synchronous and electrical port, go to step f.
b. If Synchronous and optical port, go to step g.
c. If Not-Synchronous, go to step h.
WebEML User Manual
Figure
241.
g
h
d
f
22916