Figure 335 Enable The Mpt-Hls Radio - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 335 Enable the MPT-HLS radio
iv
To enable an MPT-HLS fan
1. See
v
4. Click on one of the vertical slots of the subrack.
5. In the Settings panel, choose MPT-HLS from the Equipment Type drop-
down.
6. Choose one of the ports on the EASv2 card from the Interface drop-down.
7. Click on the Apply button. An SD check box is displayed.
8. If the diversity combiner is in use, select the SD check box and click on the
Apply button.
9. The card is enabled. The fan slot is outlined in red.
Figure 336 and follow the steps to enable the fan.
To enable the fan:
vi vii
Enable equipment
23758
519