Release 7.0.0 3DB 19286 ACAA Issue 01
Use the Provisioning Tool
Figure 668
Core Configuration screen example
894
iii. If autonegotiation is disabled, select a fixed speed and direction pair in the
"Speed - Duplex" area.
iv. If autonegotiation is enabled, Synch-E can be configured: choose
Synchronous and select the operating mode: Master or Slave. The SSM
(Synchronization Status Message) message can also be enabled.
Note: The Provisioning Tool does not distinguish between MPT-HC or MPT-HC-
HQAM and their -XP variants. For example, to configure an MPT-XP-HQAM
choose MPT-HQAM.
Note: MPT-MC appears in the drop-down menu. The MPT-MC unit is not used in North
America.
WebEML User Manual