Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Configure radio parameters
Figure 653
MPT-HC Settings tab with ATPC
54. Provision MPT ODU radio channel ATPC:
55. Select an action.
56. Provision the spare MPT ODU ATPC
57. Provision the spare MPT ODU radio channel ATPC:
870
i. Select the ATPC Enabled check box.
ii. Enter the Min and Max transmit power value range (dBm).
iii. Enter the Remote ATPC Rx Threshold (-min / -max dBm).
iv. Click Apply.
a. To
Provision the spare MPT ODU
b. To
Provision the MPT ODU radio protection
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see
ATPC, go to step 56.
scheme, go to step 58.
Figure 653
for an example of the ATPC settings.
WebEML User Manual
Advertisement
Table of Contents
