Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Provision port segregation/connectivity
Provisioning port segregation/connectivity between a Core card Ethernet port and
P8ETH or EASv2 card is limited to all Ethernet ports on the P8ETH or EASv2 card.
Provisioning port segregation/connectivity from a specific Core card Ethernet port to
a specific P8ETH or EASv2 Ethernet port is not supported.
Provisioning port segregation/connectivity between a P8ETH or EASv2 card
Ethernet port is limited to the remaining Ethernet ports on the P8ETH or EASv2 card.
Provisioning segregation/connectivity from a specific P8ETH or EASv2 port to a
specific Core Ethernet port is not supported.
Provisioning port segregation/connectivity between an MSS-O Ethernet port is
limited to the remaining Ethernet ports on the MSS-O.
When parallel radio paths are supported by the same MSS shelf, provision port
segregation between the radio paths at both NEs to prevent traffic from one radio
path being transmitted back to the originating site on one of the other parallel radio
paths.
When parallel radio paths are created using P8ETH MPT-HL/MPT-HLC or EASv2
MPT-HL/MPT-HLC ports, provision port segregation between the parallel MPT-HL/
MPT-HLC radio ports. For an example of the port segregation dialog box provisioned
between P8ETH port 3.5 and port 3.8 (connectivity check box unchecked), see
Figure
3.8 provisioned for port segregation, see
When parallel radio paths are created using Core MPT-HL/HLC ports, provision port
segregation between the parallel MPT-HL/HLC radio ports. Example of the port
segregation dialog box provisioned between Core-E port 1.5 and port 1.6
(connectivity check box unchecked), see
window with Core-E port 1.5 and port 1.6 provisioned for port segregation, see
Figure
When parallel radio paths are created using MPTACC MPT-HC/XP/HC-HQAM/XP-
HQAM/9558HC ports, provision port segregation between the parallel MPT-HC/XP/
HC-HQAM/XP-HQAM/9558HC radio ports. Example of port segregation window with
port 6.1 and port 6.2 provisioned for port segregation, see
When making Ethernet cross connections to one of parallel radio ports, port
segregation should be provisioned between the Ethernet port and all other parallel
radio ports.
When making a radio cross connections to one of parallel radio ports, port
segregation should be provisioned between the radio port and all other parallel radio
ports.
Port segregation should be provisioned between Ethernet ports and other Ethernet
and/or radio ports where connectivity is not desirable.
394
222. For an example of port segregation window with P8ETH port 3.5 and port
225.
WebEML User Manual
Figure
223.
Figure
224. Example of port segregation
Figure
226.
Advertisement
Table of Contents
