Figure 690 Available Ports; Figure 691 Lowest Index Port Selected - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Use the Provisioning Tool
Figure 690 Available ports
Figure 691 Lowest index port selected
920
5. Select a port in the Available Ports area and click on the Right Arrow button
to move the selected port in the Added Ports area.
The Available Ports field shows only the ports which can be configured as
Lowest index port (MPTs with odd numbers); see
The first selected port inserted in the Added Ports field, on the right side, will
be the Lowest index port (Slot #3 - Port #5).
The Available Ports field shows all the remaining ports (also the ports with
the even number: example Slot #4 - Port #8); see
Note: The Available Ports field shows only the ports with a number higher than the
number of the Lowest index port (as example, if the Lowest index port is 4.7, the port will
be only 4.8; if the Lowest index port is 3.5, the ports will be 3.6, 3.7, 3.8, 4.5, 4.6, 4.7 and
4.8).
6. Add additional ports to the LAG as required.
7. Choose the suitable WTR (Wait To Restore) time using the WTR toggle
switch.
8. Select the Enabled check box.
9. If required, enable the PPP RF channel and select the OSPF Area.
WebEML User Manual
Figure 690.
Figure 691.