Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 178
Administer Ethernet LAG VLAN configuration
i
ii
ii
iv
To destroy an L2 Ethernet or L1/L2 Radio LAG port
1. Using the craft terminal, verify L2 Ethernet or L1/L2 Radio LAG port, to be
v
i. From the Configured LAGs pane, select LAG to administer VLAN
Configuration.
ii. From the VLAN Configuration pane, in the Acceptable Frame Types field,
select: (admit all or admit tagged only).
iii. If admit all is selected, then provision Port VLAN ID (1 to 4080).
Note: VLAN ID must be provisioned with the VLAN Configuration tool prior to
provisioning VLAN Configuration.
iv. If admit all is selected, then provision Priority (0 to 7).
v. Click Apply.
destroyed, is not associated with any of the following:
− Cross-Connections
Administer L1/L2 radio and L2 Ethernet LAG
ports
22902
325
Advertisement
Table of Contents
