Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
9. Download and save the Current Configuration file. See
10. Create L1 LAG port. See
11. Add MPT-HL radio interface to L1 LAG port. See
Figure 779
MPT-HL to L1 LAG information message
12. Click on the OK button.
Figure 780
MPT-HL to L1 LAG warning message
13. Click on the Yes button.
14. Wait for the system to migrate services to the L1 LAG port.
15. Close the craft terminal.
16. Reopen the craft terminal and log in to the NE.
17. Verify that the radio direction is alarm free.
18. Verify that the radio direction is error free and operating as expected.
for a detailed procedure to download and save the current configuration file.
a detailed procedure to create L1 LAG port.
Ethernet LAG ports
for a detailed procedure to create L1 LAG port.
When you add the radio port to the L1 LAG port, the message in
display.
After you click on the OK button, the message in
The time required for the system to migrate the MPT-HL radio port to the L1 LAG
port is dependent upon radio port provisioning (synchronization, PPP RF,
number of; port segregations, VLANs, and cross-connections provisioned).
Typical migration duration is two minutes or less. Allow up to five minutes for the
system to migrate all services from the MPT-HL radio port to the L1 LAG port.
When the system has completed migrating to the L1 LAG port you will be
prompted to close the craft terminal.
Upgrade MPT-HL to MPT-HL L1 LAG port
Administer L1/L2 radio and L2 Ethernet LAG ports
View NE Inventory data
Administer L1/L2 radio and L2
Figure 779
Figure 780
will display.
for
will
1065
Advertisement
Table of Contents
