Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
34. Select Protection Schemes tab.
35. Select Protection Scheme Parameters tab.
36. Provision RPS Cable Configuration:
Figure 646
Dialog box with virtual cable and HQAM
37. Click Apply.
Figure 647
MPT ODU Protection Scheme parameters RPS Cable configuration
− Select the Physical Cable check box for Physical Cable or leave it
unselected for Virtual Cable. Virtual cable is the default.
If Virtual Cable is configured with MPT-HQAM and channel spacing is
greater than 30 MHz a dialog box appears, as shown in
Configure radio parameters
Figure
646.
861