Figure 202 Sdh-Ring Cross Connection - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Provision cross connections
1. Verify port segregation provisioning. Port segregation should be provisioned
2. Select SDH port and drag to draw line to RING port.
Figure 202 SDH-RING Cross Connection
3. On the STM-1(OC-3)_RING pop-up, verify the ERP instance to be cross
4. On the STM-1(OC-3)_RING pop-up, verify the Flow Id to be cross connected.
5. On the STM-1(OC-3)_RING pop-up, click OK.
6. On the Cross Connection screen, click Apply.
368
between parallel radio paths at both ends when they exist on the NE. Also port
segregation should be provisioned between the radio port and other Ethernet
and/or radio ports where connectivity is not desirable. See
segregation/connectivity
SDH-RING pop-up displays. See
connected.
for detailed steps to view/provision port segregation.
Figure 202.
WebEML User Manual
Provision port