Figure 440 Node I To Ne G (Protected): Pass-Through Cross-Connection On Node D - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Provision cross connections in a mixed fiber/
microwave Ring
Figure 440 Node I to NE G (protected): pass-through cross-connection on Node D
To provision a cross-connection between Node I and NE E
1. One traffic end point is connected using Ethernet to the fiber chain, see
630
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring Destination MAC address: NE G Multicast MAC address
e. Enter the Ring Source MAC address: Node A Unicast MAC address
Figure 441.
WebEML User Manual