Figure 656 Mpt-Hc Additional Settings Tab - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Configure radio parameters
Figure 656 MPT-HC Additional Settings tab
67. Provision MPT ODU radio link identifier:
Note: If the MPT ODU is part of a LAG, you cannot change the SSM or PPP settings on an
individual radio. Go to
ports.
68. Provision the MPT ODU Synchronization Status Messaging
874
i. Select the Link Identifier Configuration Enabled check box.
ii. Enter the Expected Identifier value (0 to 255).
iii. Enter the Sent Identifier value (0 to 255).
iv. Click Apply.
Administer L1/L2 radio and L2 Ethernet LAG ports
i. Select the Synchronization SSM Enabled check box see
ii. Click Apply.
WebEML User Manual
to administer LAG
Figure 603.