Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Provision equipment port
Figure 267
Provision P2E3DS3 DS3 port
b
a
c
f
g
h
448
All ports on a DS3 card must be provisioned to the same method of
clock recovery, either adaptive or differential. After the first port on a
card is provisioned, all remaining ports on the card will default to the
clock recovery method selected on the first port.
j. From the Payload Size drop-down menu, select payload size: 1024.
k. From the TDM Clock Source drop-down menu, select TDM Clock Source:
Adaptive or Differential.
l. Enter the unique ECID Tx value.
m. Enter the unique ECID Rx value.
n. Click Apply.
The PDH Main View updates adding the provisioned DS3 port to the
resource list area. See
n
Figure 268
and
Figure
WebEML User Manual
d
j
k
e
l
m
23046
269.
Advertisement
Table of Contents
