Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Administer In-Band TMN VLAN port
4. Select Settings tab. See
5. Select the Working Mode Enabled check box.
6. Enter the VLAN ID for the In-band TMN Ethernet interface in the VLAN ID field.
7. Choose the DSCP value from the DSCP drop-down menu.
8. Choose the PCP value from the PCP drop-down menu.
9. Enter the IP address for the In-band TMN Ethernet interface in the IP address
10. Enter Sub-Network Mask for the In-band TMN Ethernet interface in the IP Mask
11. From the IP Routing Protocol drop-down menu, Static Routing or OSPF.
12. If OSPF is selected, from the OSPF Area Number drop-down menu, select
13. Select all Ethernet ports which will be a member of TMN In-Band from the
14. Click Apply.
15. Click OK.
16. Verify In-band TMN Ethernet interface provisioning. See
126
field.
field (IPv4 mode) or Network Prefix size in the Prefix Length field (IPv6 mode).
OSPF Area Number for the In-band TMN Ethernet interface.
Associated Ethernet Ports field.
Configuration Update window displays.
Figure
39.
WebEML User Manual
Figure
40.
Advertisement
Table of Contents
