Release 7.0.0 3DB 19286 ACAA Issue 01
Configure radio parameters
45. Select an action.
46. Provision the spare MPT-HLS ATPC
47. Provision Spare MPT-HLS radio channel ATPC:
48. Provision the MPT-HLS radio protection scheme
Note: Revertive restoration criteria is the default value.
842
a. To
Provision the spare MPT-HLS
b. To
Provision the MPT-HLS radio protection
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see
parameters.
i. Select the ATPC Enabled check box.
ii. Enter the Min-Max transmit power value range (dBm).
iii. Enter the Remote ATPC Rx Threshold.
iv. Click Apply.
Open the appropriate radio main view depending on your radio configuration
and select Protection Schemes tab; see
ATPC, go to step 46.
scheme, go to step 48.
Figure 630
for an example of the ATPC
Figure
632.
WebEML User Manual