Release 7.0.0 3DB 19286 ACAA Issue 01
Administer L1/L2 radio and L2 Ethernet LAG
ports
Figure 181
L1 radio LAG configuration
To disable SSM support for L1 radio LAG port
1. Using the LAG Configuration Tool Settings tab, disable SSM support using the
To enable PTB for L1 radio LAG port
1. Using the LAG Configuration Tool Settings tab, enable PTB using the following
330
i. From the Configured LAGs pane, select LAG to enable SSM support.
ii. From the SSM pane, select Enabled check box (checked).
iii. Click Apply.
following procedure: See
i. From the Configured LAGs pane, select LAG to disable SSM support.
ii. From the SSM pane, select Enabled check box (unchecked).
iii. Click Apply.
procedure: See
Figure
Figure
181.
181.
WebEML User Manual