Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
74 Upgrade and downgrade radio profile
74.1 Purpose
These procedures describe how to upgrade and downgrade radio profile on the 9500
MPR system.
74.2 General
The radio profile upgrade and downgrade procedures provide the general steps and
sequence required to change protection scheme. The number of possible radio
profile scenarios prevents covering all upgrade and downgrade possibilities.
74.3 Radio profile
Radio profile upgrade applies when the new radio profile has a capacity which is
larger than the existing profile. In this case all the existing TDM2TDM or TDM2ETH
cross-connections are kept and the residual bandwidth for new TDM2TDM or
TEM2ETH cross-connections are calculated.
Radio profile downgrade applies when the new radio profile has a capacity which is
smaller than the existing profile. When all the existing TDM2TDM and TDM2ETH
cross-connections are supported by the new profile, all the existing TDM2TDM and
TDM2ETH cross-connections are kept and the residual bandwidth for new
TDM2TDM and TEM2ETH cross-connections will be recomputed. When all the
existing TDM2TDM and TDM2ETH cross-connections can not be supported by the
new profile, the request to change radio profile are rejected. Some existing
TDM2TDM and/or TEM2ETH cross-connections must be deleted to achieve a
bandwidth which is supported by the new radio profile.
See the 9500 MPR Product Information Manual to determine card location and type.
Upgrade and downgrade radio profile
1057
Advertisement
Table of Contents
