Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
52 Disable equipment
52.1 Purpose
This chapter provides procedures to Disable cards in the system.
52.2 Prerequisite
Associated facilities and equipment ports must be deprovisioned before a card may
be disabled.
52.3 Procedures
This section provides the following procedures:
Note: The Core graphics in this chapter show the Core-E card. The procedure is
similar for a CorEvo card.
•
To disable the spare Core card
•
To disable a radio
•
To disable an MPT-HL or MPT-HLC transceiver card on Core
•
To disable a P8ETH card
•
To disable an EASv2 card
•
To disable a P32E1DS1 card
•
To disable a DS3 P2E3DS3 card
•
Disable an SDH card
•
To disable an MPT ODU on MPTACC
•
To disable an MPT ODU on Core
•
To disable an MPT-HC/XP/HC-HQAM/XP-HQAM/9558HC on P8ETH or EASv2
•
To disable an MPT access card
•
To disable an auxiliary card
Disable equipment
523