Figure 328 Enabled Mpt-Hc Odu On Core-E Electrical Ethernet Port - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Enable equipment
Figure 328 Enabled MPT-HC ODU on Core-E electrical Ethernet port
9.
To enable an MPT ODU on P8ETH or EASv2 card
1. Select a slot that is equipped to support P8ETH or EASv2 card and the MPT
512
Caution: When parallel radio paths exist between two MSS shelves, port
segregation should be provisioned between the parallel radio paths at both ends
to prevent a loss of traffic.
Verify port segregation provisioning. Port segregation should be provisioned
between parallel MPT ODU radio paths at both ends when they exist on the NE.
Port segregation should be provisioned between the Core MPT ODU port and
other Ethernet and/or radio ports where connectivity is not desirable. See
Provision port segregation/connectivity
segregation.
ODU in the resource tree area. The selected name will highlight in blue. This
selection also highlights the card in blue on the graphical representation of the
MSS shelf in the resource list area.
WebEML User Manual
for detailed steps to view/provision port