Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
16 Administer external alarm points on an
16.1 Purpose
The procedure in this chapter provides instructions to administer the external alarm
points supported by the MSS-1 unit and the Enhanced Fan card.
16.2 Prerequisites
For MSS-1: The MSS-1 must be active before the external alarm points can be
provisioned.
For the Enhanced Fan card: The Enhanced Fan card must be enabled in MSS-8 slot
9 before the external alarm points can be provisioned.
16.3 Overview
The MSS-1 and Enhanced Fan card support four external alarm inputs and three
alarm outputs.
Each external alarm input is provisionable; alarm active low or active high, and user
label.
The alarm outputs do not require provisioning by the operator: they operate alarm
LEDs on the shelf.
MSS-1 or Enhanced Fan card
Administer external alarm points on an MSS-1 or
Enhanced Fan card
117