Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 568
Ring's Fiber Chain for Aided Cross-connections window
2. In the Ring Nodes of Fiber Chain panel, click on the button to add Ring nodes.
3. In the External Network Elements panel, click on the button to add external NEs.
4. In the Cross-Connection Gateway panel, select either No Gateway, Outside
5. Click on the Apply button.
6. Cross-connections window
Enter the label, topology type and NE MAC address for each node in the fiber
chain. Verify that the correct nodes are entered as the first and last node.
For each external NE, enter the label, NE MAC address, and the label of the
Ring Node to which the external NE is connected.
Ring's Fiber Chain, or, if applicable, a node inside the fiber chain that aggregates
TDM flows.
Provision Ring cross-connections using the
aided cross-connection tool
755