Nokia 9500 MPR User Manual page 301

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 164 Add VLAN IDs to ERP Instance
2. Add VLAN IDs to Ethernet Ring cross-connections. For detailed steps to add
To delete PDH, Radio, ETH, OR Pass-Through VLAN IDs from an ERP Instance
1. Delete VLAN IDs from Ethernet Ring cross-connections. For detailed steps to
2. Delete PDH, Radio, Eth, and Pass-Through VLAN IDs from ERP Instance using
e. Click Apply.
PDH, Radio, Eth, and Pass-Through to Ring cross-connections, see
cross connections.
delete PDH, Radio, Eth, and Pass-Through to Ring cross-connections, see
Deprovision cross connections.
the following procedure:
See Figure 165 for the following steps:
a. Select ERP instance to delete Radio flows.
b. Select VLAN IDs in VLAN ID table.
c. Click Delete.
d. VLAN IDs are removed from the VLAN ID table.
e. Click Apply.
Administer Ethernet Ring Protection (ERP)
Provision
301