Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 299
P8ETH enabled
5. Verify port segregation provisioning. Port segregation should be provisioned
To enable an EASv2 card
1. Select MSS-n/Slot# (slot 3 through 8) in the resource tree area where the
between the P8ETH Ethernet ports and other Ethernet and/or radio ports where
connectivity is not desirable. See
detailed steps to view/provision port segregation.
EASv2 card will be enabled. The selected slot will highlight in blue. This
selection also highlights the selected slot in blue on the graphical representation
of the MSS shelf in the resource list area. See
Provision port segregation/connectivity
Figure
300.
Enable equipment
for
483