Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 163
Modify ERP Instance with ERP Instance disabled
4. Enable the ERP instance; see
To delete an ERP Instance
1. An ERP Instance can be deleted when the ERP Instance is either enabled or
Caution: To avoid loops, the operator must first remove Ring Ports from the VLAN
membership of VLANs associated to the ERP Instance and then delete the ERP Instance.
e. For Ring Node which is RPL Owner, select RPL Owner check box
(checked), for Ring Nodes which are not RPL Owner, RPL Owner check
box (unchecked), if applicable.
Is RPL Owner selected?
a. If yes, go to step f.
b. If no, go to step g.
f. Select RPL Owner Port, East Port or West Port, if applicable.
g. Click Apply.
Ethernet Protection Ring Configuration window updates.
disabled.
An ERP Instance can be deleted only when no cross-connections are
associated with the ERP Instance.
ERP Instance deletion automatically removes the VLAN ID associated with the
ERP Instance from the VLAN Configuration. This removal does not modify
VLAN port membership of VLANs associated to the ERP Instance. To avoid
loops, the operator should first remove Ring Ports from the VLAN membership
and then delete the ERP Instance.
Administer Ethernet Ring Protection (ERP)
To enable an ERP
Instance.
299
Advertisement
Table of Contents
