Nokia 9500 MPR User Manual page 328

Release 7.0.0 3DB 19286 ACAA Issue 01
Administer L1/L2 radio and L2 Ethernet LAG
ports
3. Disable PPP RF on radio LAG port
To provision hashing level for L2 Ethernet/radio LAG port
1. Using the LAG Configuration Tool Settings tab, provision Hashing level using
328
Note: OSPF Area must be provisioned prior to provisioning PPP RF channel.
v. Click Apply.
Using the LAG Configuration Tool Settings tab, disable PPP RF configuration
using the following procedure: See
i. From the Configured LAGs pane, select LAG to disable PPP RF channel.
ii. From the PPP RF pane, select Enabled check box (unchecked).
iii. Click Apply.
the following procedure: See
Figure 179.
Figure 180.
WebEML User Manual