Figure 482 Node A To Node C: Pass-Through Cross-Connection On Node D - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Provision cross connections in a mixed fiber/
microwave Ring
Figure 482 Node A to Node C: pass-through cross-connection on Node D
To provision a cross-connection between Node A and Node C (protected)
1. Both traffic end points belong to the fiber chain. The end point at Node C is
668
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring Destination MAC address: Node C Unicast MAC address
e. Enter the Ring Source MAC address: Node A Unicast MAC address
protected; see Figure 483.
WebEML User Manual