Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 492
Node B to Node C: PDH-Ring cross-connection on Node B
3. Configure a Radio-Ring or PDH-Ring cross-connection on Node C, see
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring Destination MAC address: Node C Unicast MAC address
Figure 493
and
Figure
494.
Provision cross connections in a mixed fiber/
microwave Ring
677