Nokia 9500 MPR User Manual page 375

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
8. On the Cross Connection screen, click Apply.
9. From the Connections tab, verify the RADIO-RADIO cross-connections were
To provision a PDH to Ring Cross Connection
1. Verify port segregation provisioning. Port segregation should be provisioned
2. Select a PDH port and drag to draw a line to the RING port.
entered correctly.
Caution: When parallel radio paths exist between two MSS shelves, port
segregation should be provisioned between the parallel radio paths at both ends
to prevent a loss of traffic.
between parallel radio paths at both ends when they exist on the NE. Also port
segregation should be provisioned between the radio port and other Ethernet
and/or radio ports where connectivity is not desirable. See
segregation/connectivity
PDH-RING pop-up displays. See
for detailed steps to view/provision port segregation.
Figure 208.
Provision cross connections
Provision port
375