Nokia 9500 MPR User Manual page 800

Release 7.0.0 3DB 19286 ACAA Issue 01
Configure radio parameters
Note: For 1+1 FD protection type, HSB Protection is not available.
26. Select Equipment Protection in the resource tree area.
27. From the Restoration Criteria panel, verify the Restoration Criteria selection and
28. Select HSB Protection in the resource tree area.
29. From the Restoration Criteria panel, verify the Restoration Criteria selection and
30. Select Rx Radio Protection in the resource tree area.
31. From the Restoration Criteria panel, verify the Restoration Criteria selection and
32. Provision the MPT-HL link identifier
800
provision if required:
i. Select the Not Revertive or Revertive radio button.
ii. Click Apply.
provision if required:
i. Select the Not Revertive or Revertive radio button.
ii. Click Apply.
provision if required:
i. Select the Not Revertive or Revertive radio button.
ii. Click Apply.
Open the appropriate radio main view depending on your radio configuration
and select the Additional Settings tab; see
WebEML User Manual
Figure 603.