Nokia 9500 MPR User Manual page 331

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
To disable PTB for L1 radio LAG port
1. Using the LAG Configuration Tool Settings tab, disable PTB using the following
To provision Wait-To-Restore (WTR) value
1. Using the LAG Configuration Tool Settings tab, provision WTR value using the
i. From the Configured LAGs pane, select the LAG to enable PTB.
ii. From the PTB pane, select the Enabled check box (checked).
iii. Click Apply.
procedure: See Figure
i. From the Configured LAGs pane, select the LAG to disable PTB.
ii. From the PTB pane, select the Enabled check box (unchecked).
iii. Click Apply.
following procedure: See
a. From the Configured LAGs pane, select LAG to provision WTR value.
b. From the WTR drop-down menu, select WTR period (100 ms to 8 sec).
c. Click Apply.
Administer L1/L2 radio and L2 Ethernet LAG
181.
Figure 181.
ports
331