Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 211
Ring to Ring Cross Connection
2. On the RING-RING pop-up, select ERP Instance to be cross connected.
3. On the RING-RING pop-up, select Flow ID number in the Available VLANs field.
Note: Ranging is supported for RADIO-RADIO cross-connection entry.
4. From the Service Profile drop-down menu, select TDM2TDM or TDM2ETH.
5. Is the Profile configured with TDM2ETH?
6. From the Clock Source drop-down menu, select ADAPTIVE or DIFFERENTIAL.
7. On the RING-RING pop-up, click >>.
a. If yes, go to step 6.
b. If no, go to step 7.
Provision cross connections
381