Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 550
NE E to NE G: Ethernet-PDH cross-connection on NE E
2. Configure an Ethernet-Radio or Ethernet-PDH cross-connection on NE G, see
e. Choose the flow ID from the Flow Id drop-down
f. Configure the payload size, ECID Tx, and ECID Rx parameters
g. Choose the Service profile: TDM2TDM or TDM2ETH
h. Choose the TDM clock source, if the Service profile is TDM2ETH
i. Enter the MAC address: NE G Unicast MAC address
Figure 551
and
Figure
552.
Provision cross connections in a mixed fiber/
microwave Ring
735