Nokia 9500 MPR User Manual page 821

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Danger: For 1+1 FD protection type, HSB Protection is not available.
49. Select Equipment Protection in the resource tree area.
50. Select HSB Protection in the resource tree area.
51. From the Restoration Criteria panel, verify the Restoration Criteria selection and
52. Select Rx Radio Protection in the resource tree area.
53. From the Restoration Criteria panel, verify the Restoration Criteria selection and
54. Provision the MPT-HLC link identifier
i. From the Restoration Criteria panel, verify the Restoration Criteria selection
and provision if required:
ii. Select the Not Revertive or Revertive radio button.
iii. Click Apply.
provision if required:
i. Select the Not Revertive or Revertive radio button.
ii. Click Apply.
provision if required:
i. Select the Not Revertive or Revertive radio button.
ii. Click Apply.
Open the appropriate radio main view depending on your radio configuration
and select the Additional Settings tab; see
Configure radio parameters
Figure 619.
821