Figure 603 Mpt-Hl Additional Settings Tab - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 603 MPT-HL Additional Settings tab
33. Provision MPT-HL radio link identifier:
Note: If the MPT-HL is part of a LAG, you cannot change the SSM, PKT throughput booster,
or PPP settings on an individual radio. Go to
ports
34. Provision the MPT-HL Synchronization Status Messaging
i. Select the Link Identifier Configuration Enabled check box.
ii. Enter the Expected Identifier value (0 to 255).
iii. Enter the Sent Identifier value (0 to 255).
iv. Click Apply.
to administer LAG ports.
i. Select the Synchronization SSM Enabled check box; see
ii. Click Apply.
Configure radio parameters
Administer L1/L2 radio and L2 Ethernet LAG
Figure 603.
801