Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Provision equipment port
4. Click Apply.
Note: Ports 1-4 and ports selected SFP are ready for provisioning.
Figure 260
Provisioned P8ETH SFP port
5. Verify port segregation provisioning. Port segregation should be provisioned
To provision MSS-O SFP port
1. Select the MSS/CORE slot in the resource tree area. The selected name will
2. Click the Settings Tab in the resource detail area.
3. From the Port # 4 Usage drop-down menu, select port usage type SFP.
440
The SFP port will populate the selected port #. See
between the SFP Ethernet port and other Ethernet and/or radio ports where
connectivity is not desired. See
detailed steps to view/provision port segregation.
highlight in blue.
Figure
Provision port segregation/connectivity
WebEML User Manual
260.
for
Advertisement
Table of Contents
