Figure 323 Enabled Mpt-Hc Odu On Mptacc - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 323 Enabled MPT-HC ODU on MPTACC
5.
To enable an MPT ODU on Core
1. Select a slot that is equipped to support MSS/CORE card and the MPT ODU in
Caution: When parallel radio paths exist between two MSS shelves, port
segregation should be provisioned between the parallel radio paths at both ends
to prevent a loss of traffic.
Verify port segregation provisioning. Port segregation should be provisioned
between parallel MPT ODU radio paths at both ends when they exist on the NE.
Port segregation should be provisioned between the MPTACC MPT ODU port
and other Ethernet and/or radio ports where connectivity is not desirable. See
Provision port segregation/connectivity
segregation.
the resource tree area. The selected name will highlight in blue. This selection
also highlights the Core card in blue on the graphical representation of the MSS
shelf in the resource list area.
Enable equipment
for detailed steps to view/provision port
507