Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
28. Select an action.
29. Provision the MPT-HLC radio for fixed modulation
Figure 614
MPT-HLC Settings tab for fixed modulation
30. Provision MPT-HLC radio port:
Note: Depending on the modem profile selected, the Tx power may become out of range.
If this occurs, provision the Tx power to the desired level or to one supported by the modem
profile to clear the warning message.
a. To
Provision the MPT-HLC radio for fixed
b. To
Provision the MPT-HLC radio for adaptive
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see
i. In the Mode field, select the Preset button.
Configure radio parameters
modulation, go to step 29.
modulation, go to step 32.
Figure
614.
813