Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Configure radio parameters
38. Provision the MPT-HLS manual transmit power level (RTPC)
39. Provision MPT-HLS radio channel transmit power level:
40. Select an action.
41. Provision the spare MPT-HLS RTPC
42. Provision Spare MPT-HLS radio channel transmit power level:
43. Provision the MPT-HLS Automatic Transmit Power Control (ATPC)
840
b. To
Provision the MPT-HLS Automatic Transmit Power Control
to step 43.
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see
i. Choose the TxPower (dBm) level for the lowest modulation scheme in the
range. Power levels for the other modulation schemes will be set
automatically.
ii. Click Apply.
a. To
Provision the spare MPT-HLS
b. To
Provision the MPT-HLS radio protection
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see
i. Choose the TxPower (dBm) level for the lowest modulation scheme in the
range. Power levels for the other modulation schemes will be set
automatically.
ii. Click Apply.
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see
Figure
627.
RTPC, go to step 41.
scheme, go to step 48.
Figure
629.
Figure
630.
WebEML User Manual
(ATPC), go
Advertisement
Table of Contents
