Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 34
External Alarm Outputs provisioned
9. Close the AUX Main View window.
To provision external alarm output state
1. Select MSS-4/AUX slot #4 or MSS-8/AUX slot #8 in the resource tree area.
2. Double-click on the blue AUX Card.
3. Click the External Points tab.
4. Click the Settings tab. See
5. Select External Alarm Point to change alarm state in the resource tree area or
6. Select the External Output External State radio button, On or Off.
7. Click Apply.
This selection should also highlight the MSS/AUX card in blue on the graphical
representation of the MSS shelf in the resource list area.
The AUX Main View window opens.
Resource List Table.
Administer external alarm points on an Auxiliary
Figure
34.
card
115