Nokia 9500 MPR User Manual page 171

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 83 NTP Configuration window
2. Select Enabled check box (checked) in the NTP Protocol area.
3. Enter IP address of the Main NTP Server in the Main Server address field.
4. Enter IP address of the Spare Server in the Spare Server address field.
5. Click Apply.
6. Click OK.
7. Click Close.
To view NTP Server Status using Web Server
1. Log In to NE to view NE alarms. For detailed steps to log in to an NE using a
2. From the web server Main Menu pane, select Date & Time Setting.
The Information 'Set NTP Server success!' window opens.
web browser, see Log in to and out of
The 9500 MPR Web Server displays. Active Alarms is the default web server
window.
The Date & Time Setting window displays. See
Administer system date and time
system.
Figure 80.
171