Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
3. Are forced protection switches active?
4. Determine if the active forced protection switch(es) can be released. Release all
Caution: Failure to release all protection switches prior to performing a MIB Management
database backup, may result in the system being restored to an unknown state. If this
occurs, communications with the system may be difficult to reestablish and may result in the
loss of traffic.
5. Perform one of the following:
6. From the main menu bar, select Supervision>MIB Management>Restore /
Figure 106
Restore / Activate MIB Management Database main menu bar path
7. Choose the protocol that you need to use to transfer the data. If you need to use
8. Click on the OK button. The Restore window opens. See
a. If yes, go to step 4.
b. If no, go to step 5.
forced protection switch(es) prior to proceeding with this procedure.
a. Disable the spare Core card. For detailed instruction, see
equipment.
b. Physically unseat the spare Core card.
Activate. See
Figure
106.
The Protocol Selection window opens, see
SFTP, enter the username and password to access the NE.
MIB database management (backup and
Figure
104.
Figure
restore)
Disable
107.
205
Advertisement
Table of Contents
