Firewall
Configure port forwarding
Required configuration items
The network interface for the rule.
n
Network connections will only be forwarded if their destination address matches the IP
address of the selected network interface.
The public-facing port number that network connections must use for their traffic to be
n
forwarded.
The IP address of the server to which traffic should be forwarded.
n
The port or range of ports to which traffic should be forwarded.
n
Additional configuration items
A label for the port forwarding rule.
n
The IP version (either IPv4 or IPv6) that incoming network connections must match.
n
The protocols that incoming network connections must match.
n
A white list of devices, based on either IP address or firewall zone, that are authorized to
n
leverage this forwarding rule.
To configure a port forwarding rule:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX10 User Guide
Use Digi Remote Manager to view and manage your
Port forwarding rules
750