5. Remove the bolt and flange nut securing the cable to
the pump assembly (Fig. 227).
Fig. 227
36" & 40" Toro GrandStand Service Manual
Motion Control Cable Installation
1. Secure the cable rod end to the pump assembly
using the bolt and flange nut (Fig. 228).
DSCN-3682a
2. Secure the lower cable to the cable bracket using
the two thread forming screws and cable clamp (Fig.
229).
CONTROLS
Fig. 228
DSCN-3682a
Fig. 229
DSCN-3679a
4
4-13