30. Remove the bolt and nut securing the clutch anchor
to the engine base (Fig. 364).
Fig. 364
31. Remove the four bolts and Belleville washers secur-
ing the engine to the engine base (Fig. 365).
Fig. 365
36" & 40" Toro GrandStand Service Manual
32. Using a hoist, remove the engine from the engine
base (Fig. 366).
DSCN-2578a
33. Remove one spark plug and feed a minimum of two
feet (61cm) of 3/8" (.95cm) rope into the cylinder to
prevent engine crankshaft rotation (Fig. 367).
Note: Rotate the crankshaft as needed to permit
feeding the rope into the cylinder.
DSCN-2581a
ENGINE
Fig. 366
DSCN-2587a
Fig. 367
IMG-9634a
5
5-7