Component Replacement; Ignition Switch; Ignition Switch Removal - Toro GrandStand 74534 Service Manual

Component Replacement

Ignition Switch

Ignition Switch Removal

1. Remove the wire harness and spade connector from
the back of the ignition switch (Fig. 743).
Fig. 743
2. Depress the two tabs on the sides of the switch (Fig.
744).
Fig. 744
36" & 40" Toro GrandStand Service Manual
3. Remove the switch out through the front of the
control panel (Fig. 745).
DSCN-2219a
DSCN-2223a
ELECTRICAL
Fig. 745 DSCN-2224a
8
8-11